Forklift Battery Safe Installation and Charging
Batteries used in forklifts are pricey pieces of equipment that are pretty large weighing many pounds. The task of charging and installation of these batteries is something which must be planned out ahead of time so as to make certain that these procedures can be done correctly and safely. Maintaining a sound charging procedure and correct handling could really increase the battery's usual life span.
Standard Charging
It is suggested that the battery is not connected to the charger until it is at or less than 20% capacity. By charging the battery when it is higher than 20 percent, the lifespan of the battery can really be shortened. On roughly every 5th charge cycle, the charger needs to be set on the weekend or equalize setting, depending on which type of charger you are utilizing.
The charging cycle should never be interrupted. Once the charge cycle is done, you should avoid utilizing the battery for a few hours. By practicing these procedures, you can help make certain that you get the maximum battery performance available.
Charger Maintenance
Make certain the charger is turned off prior to hooking up the battery to the charger. You then could connect the charger to the battery. This is a common error which could accidentally cause damage to both the forklift and the charger. It is also really essential that the battery amperage should match that of the charger.
The battery must never be allowed to to deep discharge or to completely discharge. This would ultimately shorten the lift of the battery and might even prevent the charger from being able to start. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician must be called in order to re-set the charger prior to charge being able to begin.